Differences

This shows you the differences between two versions of the page.

--- en:debian [2010/12/07 23:13] – zet
+++ en:debian [2024/04/24 16:54] (current) – kukuruzo
@@ Line 3: / Line 3: @@
 In debian testing and sid and in the ubuntu packages are in the official repositories.
 <code>
 sudo apt-get install psi-plus psi-plus-plugins psi-plus-icons psi-plus-skins
@@ Line 9: / Line 8: @@
-===== Building Psi + on Debian and Debian-based systems from scratch (on the bare system) =====
+===== Nightly builds ====
+=== Ubuntu ===
-==== What may be needed and how to build? ====
+Follow the instruction on adding ppa https://launchpad.net/~psi-plus/+archive/ubuntu/ppa
-Your system may not be **QtCrypto** and **QtDev**>=4.6.0. If you do not - they must be installed prior to build.
+=== Debian ===
-Install packages to build Psi +. Installed once at the first build:
+Adding of [[https://notesalexp.org/|special PPA]]:
 <code>
-sudo apt-get install git-core qt4-dev-tools libqt4-dev build-essential subversion patch
+) echo "deb https://notesalexp.org/debian/bookworm/ bookworm main" | sudo tee /etc/apt/sources.list.d/psi-plus.list
-</code>
+) sudo touch /etc/apt/preferences.d/psi-plus
+) sudo nano /etc/apt/preferences.d/psi-plus
-Remove previous build to clean build:
+Package: *
-<code>
+Pin: release o=notesalexp.org
-cd ~
+Pin-Priority: 200
-rm -rf psi
-</code>
-Download the Psi source code and submodules from git:
+Package: psi-plus*
-<code>
+Pin: release o=notesalexp.org
-git clone git://git.psi-im.org/psi.git
+Pin-Priority: 500
-cd psi
-git submodule update --init
-</code>
-The resulting directory can be saved and then run the commands in this directory you can get the latest version Psi:
+) ^o
-<code>
+) enter
-git pull
+) ^x
-git submodule update
+) sudo apt-get install apt-transport-https
+) sudo apt-get update -oAcquire::AllowInsecureRepositories=true
+) sudo apt-get install notesalexp-keyring -oAcquire::AllowInsecureRepositories=true
+) sudo apt-get update
+) sudo apt-get install psi-plus psi-plus-webkit psi-plus-webengine psi-plus-plugins psi-plus-l10n psi-plus-skins psi-plus-sounds psi-plus-icons-nonfree
 </code>
-Download all patches and applies them to the Psi source code:
+=== System updates ===
-<code>
-cd ~
-svn co http://psi-dev.googlecode.com/svn/trunk/patches/ psi
-cd psi
-cat *.diff|patch -p1
-</code>
-Download iconsets and type current revision in Psi:
+In the future you will receive updates of psi-plus* packages as usual:
 <code>
-svn export --force http://psi-dev.googlecode.com/svn/trunk/iconsets/system/default iconsets/system/default
+sudo apt update
-rev=`svnversion`
+sudo apt upgrade
-sed "s/\(xxx\)/${rev}/" -i src/applicationinfo.cpp
 </code>
-Building Psi+ and install (root privileges needed to install):
+===== Build from source =====
-<code>
+Note, Psi+ won't build with Qt version < 5.6.0
-qconf && ./configure --enable-plugins && make && sudo make install
-</code>
-__**Note!**__  If the **qconf** not installed you must be independently download it from the official [[http://delta.affinix.com/qconf/|site]] and build it.
-If the command //./configure// get an qtcore error, then we write:
+Install packages to build Psi +. Installed once at the first build:
 <code>
-qmake-qt4 --version
+$ sudo apt install build-essential cmake git libhunspell-dev libidn11-dev libminizip-dev libotr5-dev \
+                   libqca2-dev libqca-qt5-2-dev libqt5multimedia5-plugins libqt5svg5-dev libqt5webkit5-dev \
+                   libqt5x11extras5-dev libsignal-protocol-c-dev libssl-dev libtidy-dev libxss-dev \
+                   pkg-config qt5keychain-dev qt5-qmake qtbase5-dev qtmultimedia5-dev qttools5-dev libusrsctp-dev
 </code>
+Download and build Psi+ from source code
-Look at the path and then run //./configure// with the parameter:
 <code>
-./configure --qtdir=<path>
+$ git clone --depth=1 https://github.com/psi-plus/psi-plus-snapshots
+$ mkdir psi-plus-snapshots/build
+$ cd psi-plus-snapshots/build
+$ cmake -DCHAT_TYPE=basic -DENABLE_PLUGINS=ON -DBUNDLED_IRIS=ON ..
+# or ../configure --qtselect=5 --disable-keychain
+$ make -j5
+$ sudo make install
+$ cd ../../
+$ rm -rf psi-plus-snapshots # remove not needed anymore source directory
 </code>
-Most likely it will be:
+===== Emoticons, moods and other iconsets =====
-<code>
-./configure --qtdir=/usr/bin
-</code>
+Just use downloader plugin.
+For manual install take a look at https://github.com/psi-im/resources
+===== Finally =====
+Enjoy ;-)
-==== Other resources ====
-If you need to install additional emoticons, icons and customer moods and/or Russian localization, then do the following.
-=== Emoticons, moods and other iconsets ===
 <code>
-cd /usr/local/share/psi
+$ psi-plus
-rm -rf iconsets
-svn co http://psi-dev.googlecode.com/svn/trunk/iconsets iconsets
 </code>
-Previous operation is done once, at the first build. Then it will be enough to do:
-<code>
-cd /usr/local/share/psi/iconsets
-svn up
-</code>
-=== Russian localization ===
-<code>
-cd /usr/local/share
-svn co http://psi-ru.googlecode.com/svn/branches/psi-plus psi
-</code>
-Previous operation is done once, at the first build. Then it will be enough to do:
-<code>
-cd /usr/local/share/psi
-svn up
-</code>
-==== Compile and install Psi+ Plugins ====
-Consider the example of [[plugins#gmail_notification_plugin|GMail Notification Plugin]]:
-<code>
-cd ~/psi/src/plugins/generic
-svn co http://psi-dev.googlecode.com/svn/trunk/plugins/generic/gmailnotifyplugin gmailnotifyplugin
-cd gmailnotifyplugin
-qmake gmailnotifyplugin.pro
-make
-mkdir /usr/local/share/psi/plugins
-cp libgmailnotifyplugin.so /usr/local/share/psi/plugins
-</code>
-===== Finally =====
-Enjoy ;-)